Pro3000™ Tone and Probe Series

Clear – Innovative filter technology blocks interference (“buzz”) that makes tracing difficult (“F” models only)
Precise – SmartTone^™ technology provides five distinct tones for exact pair identification
Sends loud tone up to 10 miles (16 kilometers) on most cables
Loud speaker on probe makes the tone easier to hear through drywall, wood, and other enclosures
Angled bed-of-nails clips allow easy access to individual pairs

RJ-11 connector is ideal for use on telephone jacks
Attach nylon pouch (included in kit) to your belt for easy transport

Overview

The Pro3000^™ Tone and Probe Series provides clear and precise tracing of communication cabling. The innovative filtered probe obstructs signal interference present in the environment (caused by power cables and lighting) when listening for tone. The probe’s powerful speaker makes tracing cables through drywall, wood or other enclosures quick and easy.

The Pro3000^™ toner’s patented SmartTone^™ technology (with five different tones for exact pair identification) allows the technician to identify individual pairs. The tone generator is also capable of sending tone up to 10 miles (16 kilometers) on most cables! The angled-bed-of-nails clips allow easy access to individual wires, and the RJ-11 connector is ideal for use on telephone jacks. Attach the nylon pouch to your belt, and you will be equipped for any wire identification job.

Pro3000 Analog Tone Generator and SmartTone™

Use the SmartTone™ capability of the Pro3000 Tone Generator to identify the right pair. Simply short the selected pair at the near or far end to change the cadence of the tone generated. The tone change you hear through the probe can help you identify the correct wire pair. SmartTone™ provides five distinct tones for exact pair identification.

Tone Generator features:

SmartTone™
Send tone signal up to 10 miles on most cables
Line cord features angled bed-of-nails clips and a rugged RJ-11 plug for direct access to phone and data jacks without adapters
External switch allows selection of solid or alternating tone options, indicated with solid or flashing LEDs
Continuity Testing
Line polarity confirmation

Pro3000F Filtered Probe features:

Innovative filtered probe obstructs signal of 60 Hz or 50 Hz external interference
Switch between filtered and unfiltered modes with one button press.
Tone and trace wire on non-active networks
Auto-off capability extends battery life
Loud probe speaker is audible in noisy locations

Pro3000 Unfiltered Probe

For technicians that do not require a filtered probe, there is the original Pro3000 Probe. The ergonomic sleek design is easy to handle and use. Like the Pro3000F Filtered probe, the Pro3000 Unfiltered Probe features a loud speaker to hear tone clearly through walls, enclosures and in loud environments. The recessed on/off button helps prevent the probe from accidently being turned on when stored.

Specifications

Pro 3000 Toner Specifications
User Interface	Slide Switch selects Continuity or Tone Mode Push button switch selects SOLID, ALT, or OFF Tone mode LED Continuity/Polarity LED
Solid Frequency	1000 Hz nominal
Alternating Frequency	1000/1500 Hz nominal
Over Voltage Protection/td>	60 Vdc in Toner/Polarity Mode
Output Power in Tone Mode	8 dbm into 600 ohms
Output Voltage Level in Continuity Mode	8 Vdc with fresh battery
Battery	9V alkaline
Temperature	Operating: -20°C to 60°C, Storage: -40° to 70° C
Dimensions	2.7 in. x 2.4 in. x 1.4 in. (6.9 cm x 6.1 cm x 3.6 cm)

Pro3000F Filtered Probe Specifications
User Interface	ON/OFF button (Push 1 second to activate, Press to turn off, Auto-off after 5 minutes) Filtered/Unfiltered Mode Button with LED (Green = Filtered, Red = Unfiltered) Volume dial Replaceable tip 3.5 mm earphone jack
Frequencies filtered	Pro3000F60 Probe: 60 Hz and its harmonic frequencies Pro3000F50 Probe: 50 Hz and its harmonic frequencies
Battery	9V alkaline
Temperature	Operating: -20° C to 60° C, Storage: -40° to 70° C
Dimensions	9.8 in. x 1.6 in. x 1.3 in. (24.9 cm x 4.1 cm x 3.3 cm)

Pro3000 Analog Unfiltered Probe Specifications
User Interface	ON/OFF pushbutton (Hold to activate, release to turn off) Volume dial Replaceable tip 3.5 mm earphone jack
Battery	9V alkaline
Temperature	Operating: -20° C to 60° C, Storage: -40° to 70° C
Dimensions	9.8 in. x 1.6 in. x 1.3 in. (24.9 cm x 4.1 cm x 3.3 cm)

Feature	Pro3000 Analog Tone and Probe	Pro3000F60-KIT	Pro3000F50-KIT	Intellitone Pro 200 (MT-8200-60-KIT)

Analog Signal tracing	X	X	X	X
Digital Signal tracing				X
SmartTone™	X	X	X	X
Used on Inactive Networks	X	X	X	X
Used on Active Networks				X
Frequency Filter		60 Hz	50 Hz
3.5 mm Jack	X	X	X
Replacable Tip	X	X	X
Auto-Off		X (Probe – 5 minutes)	X (Probe – 5 minutes)	X (Toner= 2.5 hours, Probe = 1 hour)
Wiremap				X
Signal Strength Indicator				X